EXHAUST MANIFOLD REMOVAL


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  2. REMOVE ENGINE UNDER COVER RH

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

  4. REMOVE ENGINE UNDER COVER LH

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01I4ED

      Disconnect the heated oxygen sensor connector.

    2. A01I53E

      Remove the 2 bolts, 2 compression springs and 2 nuts.

    3. Remove the front exhaust pipe assembly from the exhaust pipe support.

    4. Remove the 2 gaskets from the exhaust manifold converter sub-assembly and front exhaust pipe assembly.

  6. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01I5UF

      Remove the 4 bolts and No. 1 exhaust manifold heat insulator.

  7. REMOVE AIR FUEL RATIO SENSOR


    1. A01I2GK

      Remove the hose clamp.

    2. Disconnect the air fuel ratio sensor connector.

    3. A01I63CE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold.

      SST
      09224-00010

  8. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR


    1. A01I3PW

      Remove the 3 bolts and No. 1 manifold converter insulator.

  9. REMOVE NO. 2 EGR PIPE


    1. A01I2LH

      Remove the 2 bolts, 2 nuts and No. 2 EGR pipe.

    2. Remove the 2 gaskets.

  10. REMOVE NO. 2 MANIFOLD STAY


    1. A01I3II

      Remove the bolt, nut and No. 2 manifold stay.

  11. REMOVE MANIFOLD STAY


    1. A01I5KE

      Remove the bolt, nut and manifold stay.

  12. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. A01I5QU

      Remove the 5 nuts and exhaust manifold converter sub-assembly.

    2. A01I34T

      Remove the gasket.

  13. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01I3LP

      Remove the 2 bolts and No. 2 exhaust manifold heat insulator.