IGNITION COIL AND SPARK PLUG REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01I4EV

      Lift the rear of the No. 1 engine cover sub-assembly to detach the No. 1 engine cover sub-assembly from the 2 pins, and then lift the front of the No. 1 engine cover sub-assembly to detach the No. 1 engine cover sub-assembly from the pin and remove the No. 1 engine cover sub-assembly.

      Note

      Attempting to disengage both front and rear pins at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. REMOVE IGNITION COIL ASSEMBLY


    1. A01I5KB

      Disconnect the 4 ignition coil assembly connectors.

    2. A01I5NZ

      Remove the 4 bolts and 4 ignition coil assemblies.

  3. REMOVE SPARK PLUG


    1. A01I5VJ

      Using a spark plug wrench, remove the 4 spark plugs.