CAMSHAFT OIL CONTROL VALVE REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01I4EV

      Lift the rear of the No. 1 engine cover sub-assembly to detach the No. 1 engine cover sub-assembly from the 2 pins, and then lift the front of the No. 1 engine cover sub-assembly to detach the No. 1 engine cover sub-assembly from the pin and remove the No. 1 engine cover sub-assembly.

      Note

      Attempting to disengage both front and rear pins at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. A01I35S

      Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. A01I48AE06
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the oil control valve.