INTEGRATION RELAY INSPECTION


  1. INSPECT NO. 1 INTEGRATION RELAY

    A01I2AXE01
    Text in Illustration
    *1 No. 1 Integration Relay - -

    1. EFI MAIN RELAY:


      1. A01I5GFE01
        Text in Illustration
        *1 No. 1 Integration Relay

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        No. 1 integration relay 1B-1 - No. 1 integration relay 1A-8 Auxiliary battery voltage not applied between terminals 1C-7 and 1E-2 10 kΩ or higher
        No. 1 integration relay 1B-1 - No. 1 integration relay 1A-8 Auxiliary battery voltage applied between terminals 1C-7 and 1E-2 Below 1 Ω
        No. 1 integration relay 1B-1 - No. 1 integration relay 1C-3
        No. 1 integration relay 1B-1 - No. 1 integration relay 1C-4
        No. 1 integration relay 1B-1 - No. 1 integration relay 1C-9
        No. 1 integration relay 1B-1 - No. 1 integration relay 1C-10

        If the result is not as specified, replace the No. 1 integration relay.

    2. EFI MAIN2 RELAY:


      1. A01I5GFE01
        Text in Illustration
        *1 No. 1 Integration Relay

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        No. 1 integration relay 1A-6 - No. 1 integration relay 1D-1 Auxiliary battery voltage not applied between terminals 1A-8 and 1E-2 10 kΩ or higher
        No. 1 integration relay 1A-6 - No. 1 integration relay 1D-1 Auxiliary battery voltage applied between terminals 1A-8 and 1E-2 Below 1 Ω
        No. 1 integration relay 1A-7 - No. 1 integration relay 1D-1
        No. 1 integration relay 1C-6 - No. 1 integration relay 1D-1

        If the result is not as specified, replace the No. 1 integration relay.

    3. IG2 RELAY:


      1. A01I5GFE01
        Text in Illustration
        *1 No. 1 Integration Relay

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        No. 1 integration relay 1A-1 - No. 1 integration relay 1D-3 Auxiliary battery voltage not applied between terminals 1C-8 and 1E-2 10 kΩ or higher
        No. 1 integration relay 1A-1 - No. 1 integration relay 1D-3 Auxiliary battery voltage applied between terminals 1C-8 and 1E-2 Below 1 Ω
        No. 1 integration relay 1A-3 - No. 1 integration relay 1D-3
        No. 1 integration relay 1C-1 - No. 1 integration relay 1D-3
        No. 1 integration relay 1C-2 - No. 1 integration relay 1D-3
        No. 1 integration relay 1C-5 - No. 1 integration relay 1D-3

        If the result is not as specified, replace the No. 1 integration relay.