ROCKER PANEL MOULDING REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT ROCKER PANEL MOULDING END COVER


    1. A01HYIT

      Remove the 2 screws and front rocker panel moulding end cover.

  2. REMOVE ROCKER PANEL MOULDING


    1. Apply protective tape around the rocker panel moulding and door as shown in the illustration.

      A01HXYV
      Text in Illustration
      A01I1AA Protective Tape - -
    2. A01I14V

      Remove the 2 screws and grommet.

    3. A01HZU0

      Remove the screw.

    4. A01I1U9

      Remove the 7 clips.

    5. A01I0B9

      Remove the screw.

    6. A01HXES

      Disengage the 10 clips and remove the rocker panel moulding.

    7. Remove the 10 clips from the rocker panel moulding.