ROOF DRIP SIDE FINISH MOULDING REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING


    1. A01HXP3

      Apply protective tape around the center roof drip side finish moulding as shown in the illustration.

      Text in Illustration
      A01I1AA Protective Tape
    2. A01I0MK

      Using a moulding remover, disengage the 2 No. 1 roof drip side finish moulding clips and remove the center roof drip side finish moulding.

      Note


      • Do not remove the No. 1 roof drip side finish moulding clips.

      • If any No. 1 roof drip side finish moulding clip is damaged or falls out, replace it with a new one.