REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE REAR COMBINATION LIGHT PACKING


    1. A01I0OI

      Disengage the 2 guides and remove the rear combination light packing.

      Note


      • Be sure to remove any remaining old packing from the vehicle body.

      • Do not reuse the removed packing. Be sure to install a new rear combination light packing to prevent water ingress.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01I1KB

      Turn the rear turn signal light socket with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the rear turn signal light bulb from the rear turn signal light socket.

  3. REMOVE TAIL AND STOP LIGHT BULB


    1. A01I1QI

      Turn the tail and stop light socket with the tail and stop light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the tail and stop light bulb from the tail and stop light socket.

  4. REMOVE REAR BUMPER UPPER SIDE RETAINER


    1. A01HYGK

      Using a screwdriver, disengage the claw and remove the rear bumper upper side retainer as shown in the illustration.