WASHER LEVEL WARNING SWITCH REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


    1. A01I0QJ

      Remove the 3 screws and front wheel opening extension pad RH.

  3. REMOVE FRONT FENDER LINER RH


    1. A01HYQC

      Remove the clip.

    2. A01HZCYE01
      Text in Illustration
      *a 90°

      Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.

    3. A01HZ4BE01

      Remove the 5 screws and bolt.

    4. Remove the 4 clips, 3 grommets and front fender liner RH.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

      Text in Illustration
      *1 Grommet

  4. DRAIN WASHER FLUID


    1. A01I1JM

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE LEVEL WARNING SWITCH ASSEMBLY


    1. A01I18O

      Disconnect the connector.

    2. Remove the level warning switch assembly as shown in the illustration.