WASHER NOZZLE ON-VEHICLE INSPECTION


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check the position that the washer fluid hits the windshield glass.

      Standard
      Washer fluid hits the windshield glass in the areas shown in the illustration.
      A01HYURE01
      Standard Clearance
      Area Measurement Area Measurement
      A 300.0 mm (11.8 in.) B 145.0 mm (5.71 in.)
      C 175.0 mm (6.89 in.) - -
      Text in Illustration
      *a Upper Limit *b Standard
      *c Lower Limit - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.