WIPER SWITCH REMOVAL


  1. REMOVE LOWER STEERING COLUMN COVER

    Note

    Removing the lower steering column cover in the incorrect order will cause the parts to break.


    1. Release the tilt and telescopic lever, and fully extend and lower the steering column assembly.

    2. Lock the tilt and telescopic lever.

    3. A01HYEU

      Turn the steering wheel assembly to the left and remove the screw.

    4. A01HXT2

      Turn the steering wheel assembly to the right and remove the screw.

    5. A01I1L2

      Push the right and left sides of the lower steering column cover to disengage the 2 claws.

    6. A01HYKF

      Insert your fingers into the opening of the tilt lever of the lower steering column cover to disengage the 2 claws.

      Tech Tips

      Spread the claws to disengage them.

  2. REMOVE UPPER STEERING COLUMN COVER


    1. A01HZJY

      Disengage the 4 clips and 2 guides to separate the instrument cluster finish panel assembly from the upper steering column cover.

    2. A01HXZ3

      Disengage the 2 claws and remove the upper steering column cover.

  3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01I0K4

      Disconnect the 2 connectors.

    2. Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pulled with excessive force, it may break.