OUTER REAR VIEW MIRROR REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01HZJZ

      Using a moulding remover, disengage the 3 claws and remove the front door inside handle bezel plug as shown in the illustration.

  2. REMOVE FRONT DOOR FRONT LOWER FRAME UPPER COVER


    1. A01I1XM

      Disengage the 2 claws and 2 guides and remove the front door front lower frame upper cover.

  3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH


    1. A01I0MZ

      Disengage the 3 clips and remove the front door lower frame bracket garnish.

  4. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. A01I1UQ

      Using a moulding remover, disengage the 2 clips, 6 claws and 3 guides as shown in the illustration.

    2. Disconnect each connector and remove the power window regulator master switch assembly with front door armrest base panel.

  5. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    1. A01I1WB

      Using a moulding remover, disengage the 2 clips, 6 claws and 3 guides as shown in the illustration.

    2. Disconnect each connector and remove the power window regulator switch assembly with front door armrest base panel.

  6. REMOVE FRONT ARMREST ASSEMBLY


    1. A01HYAS

      Using a moulding remover, disengage the 3 clips, 7 claws and 2 guides and remove the front armrest assembly.

  7. REMOVE COURTESY LIGHT ASSEMBLY


    1. A01HXETE01
      Text in Illustration
      *A for LH Side
      *B for RH Side
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

    2. Disconnect the connector and remove the courtesy light assembly.

  8. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. A01I206E01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the front door panel.

    2. A01I1QO

      Remove the 3 screws.

    3. Using a clip remover, disengage the 10 clips.

    4. A01HYWEE01
      Text in Illustration
      *1 Front Door Inner Glass Weatherstrip
      *a Reference Boss

      Pull out the front door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.

    5. Disengage the reference boss from the front door panel.

    6. Raise the front door trim board sub-assembly to remove the front door trim board sub-assembly together with the front door inner glass weatherstrip.

    7. A01HY4G

      Disengage the clamp.

    8. Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.

  9. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP


    1. A01HXMTE01
      Text in Illustration
      *a Screwdriver

      Using a screwdriver, disengage the 4 claws and remove the front door inner glass weatherstrip from the front door trim board sub-assembly as shown in the illustration.

  10. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY


    1. A01HXZP

      Remove the clip.

    2. A01HZA4

      Disconnect the connector.

    3. Remove the 3 bolts.

    4. Disengage the claw.

    5. A01I0HE

      Disengage the clip to remove the outer rear view mirror assembly.