OUTER REAR VIEW MIRROR COVER (w/o Side Turn Signal Light) INSTALLATION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. INSTALL OUTER MIRROR COVER (for TMMK Made)


    1. Engage the 8 claws to install the outer mirror cover.

  2. INSTALL OUTER MIRROR COVER (for SIA Made)


    1. Engage the 8 claws to install the outer mirror cover.

    2. Connect the connector.

    3. Engage the clamp.

    4. Install the mirror actuator with the 3 screws.

  3. INSTALL OUTER MIRROR (for TMMK Made)


    1. w/o Blind Spot Monitor System:


      1. Connect the 2 connectors.

    2. w/ Blind Spot Monitor System:


      1. Connect the 3 connectors.

      2. Engage the 2 claws.

    3. A01I0NX

      Engage the 2 guides on the lower part of the outer mirror.

    4. A01I11M

      Engage the 2 claws on the upper part of the outer mirror to install the outer mirror.

  4. INSTALL OUTER MIRROR (for SIA Made)


    1. Connect the 2 connectors.

    2. A01HYGO

      Engage the 4 claws to install the outer mirror.