POWER WINDOW CONTROL SYSTEM OPERATION CHECK


  1. CHECK WINDOW LOCK SWITCH

    A01HXXG

    Tech Tips

    Before checking the window lock switch operation, make sure that the window lock switch is off (the switch is not pushed in).


    1. When the window lock switch of the power window regulator master switch assembly is pushed, check that the front passenger and rear windows are disabled.

    2. When the window lock switch is pushed again, check that the front passenger and rear windows can be operated normally.

    3. CHECK MANUAL UP / DOWN FUNCTION


      1. Check that the driver door power window operates as follows:

      4. OK
      Condition Master Switch Switch Operation Power Window
      Ignition switch ON Driver door Pulled halfway up Up (Closes)
      Pushed halfway down Down (Opens)

  2. Check that the front passenger door window and rear power windows operate as follows:

    OK
    Condition Regulator Switch Switch Operation Power Window

    • Ignition switch ON

    • Window lock switch off

    		 Front passenger door Pulled halfway up Up (Closes)
    Pushed halfway down Down (Opens)
    Rear LH door Pulled up Up (Closes)
    Pushed down Down (Opens)
    Rear RH door Pulled up Up (Closes)
    Pushed down Down (Opens)

  • CHECK AUTO UP / DOWN FUNCTION


    1. Check that the driver door power window operates as follows:

      OK
      Condition Master Switch Switch Operation Power Window
      Ignition switch ON Driver door Pulled up (One touch operation) Auto up (Closes)
      Pushed down (One touch operation) Auto down (Opens)

    2. Check that the front passenger door window operate as follows:

      OK
      Condition Master Switch Switch Operation Power Window

      • Ignition switch ON

      • Window lock switch off

      		 Front passenger door Pulled up (One touch operation) Auto up (Closes)
      Pushed down (One touch operation) Auto down (Opens)

  • CHECK REMOTE MANUAL UP / DOWN FUNCTION


    1. Check that the front passenger door window and rear power windows operate as follows:

      OK
      Condition Master Switch Switch Operation Power Window

      • Ignition switch ON

      • Window lock switch off

      		 Front passenger door Pulled halfway up Up (Closes)
      Pushed halfway down Down (Opens)
      Rear LH door Pulled up Up (Closes)
      Pushed down Down (Opens)
      Rear RH door Pulled up Up (Closes)
      Pushed down Down (Opens)

  • CHECK REMOTE AUTO UP / DOWN FUNCTION


    1. Check that the front passenger door window operate as follows:

      OK
      Condition Master Switch Switch Operation Power Window

      • Ignition switch ON

      • Window lock switch off

      		 Front passenger door Pulled up (One touch operation) Auto up (Closes)
      Pushed down (One touch operation) Auto down (Opens)

  • CHECK KEY-OFF OPERATION FUNCTION


    1. Check that each power window can be operated with the power window regulator master switch assembly, power window regulator switch assembly or rear power window regulator switch assembly after the ignition switch is turned off.

      Tech Tips

      If the window lock switch is on, the power windows cannot be operated by using the power window regulator switch assembly and rear power window regulator switch assembly. Therefore, turn the window lock switch off before checking the window operation.

    2. Check that the key-off operation function does not operate immediately after the driver door or front passenger door is opened.

      Tech Tips

      Even if the driver door or front passenger door is opened during auto window operation while the key-off operation function is on, the window will stop operating.

    3. Check that all the power windows cannot be operated after more than approximately 43 seconds have elapsed since the ignition switch was turned off.

  • CHECK WIRELESS TRANSMITTER-LINKED FUNCTION* (w/ Side Turn Signal Light)


    • *: This function is set through the customize setting, as it is off by default.


    1. Check that front power windows operate as follows when operating the electrical key transmitter sub-assembly:

      OK
      Condition Transmitter Operation Power Window
      No key is inside vehicle, and all doors are closed and locked UNLOCK switch pressed for more than 2.4 seconds Down (Opens)
      No key is inside vehicle, and all doors are closed and locked UNLOCK switch released Stop

  • CHECK KEY-LINKED FUNCTION*


    • *: This function is set through the customize setting, as it is off by default.


    1. Check that front power windows operate as follows:

      OK
      Condition Door Key Cylinder Operation Power Window
      No key is inside vehicle, and all doors are closed Key is turned to the lock position and held for more than 1.5 seconds Up (Closes)
      No key is inside vehicle, and all doors are closed Returned to neutral position Stop
      No key is inside vehicle, and all doors are closed Key is turned to the unlock position and held for more than 1.5 seconds Down (Opens)
      No key is inside vehicle, and all doors are closed Returned to neutral position Stop

  • CHECK JAM PROTECTION FUNCTION


    1. Check the basic function (for driver door and front passenger door).

      CAUTION:

      Do not put your fingers between the door frame and door glass to check the jam protection function. Also, prevent any part of your body from being caught during inspection.

      Tech Tips

      The jam protection function is operative during both the auto up and manual up operations while the engine is running or the ignition switch is ON, and also for approximately 43 seconds after the ignition switch is turned off.


      1. Fully open the window.

      2. A01HZIQE04
        Text in Illustration
        *a Check Jig
        *b Cloth

        Set a check jig wrapped with a piece of cloth near the window fully closed position.

      3. Operate the auto up or manual up function to check that the power window stops and goes down after the check jig is caught between the window and door frame, and stops when the opening reaches approximately 200 mm (7.87 in.) or approximately 5 seconds have elapsed.

        Tech Tips

        If the check jig is caught when the opening is approximately 75 mm (2.95 in.) or more, the power window goes down approximately 125 mm (4.93 in.) or approximately 2.5 seconds have elapsed.

      4. While the power window is moving down, check that the door glass cannot be raised using the power window switch.

  • CHECK CATCH PROTECTION FUNCTION


    1. A01I233

      Check the basic function (for driver door and front passenger door).

      Tech Tips

      The catch protection function is operative during both the auto down and manual down operations while the engine is running or the ignition switch is ON, and also for approximately 43 seconds after the ignition switch is turned off.


      1. Fully close the window.

      2. Operate the auto down or manual down function to open the window, grasp the upper edge of the door glass with one or two hands and check that the power window stops.

        Tech Tips

        After the catch protection function has operated when an auto down or manual down operation was performed, the catch protection function will not operate if the manual down operation is performed again within approximately 4 seconds.

  • CHECK POWER WINDOW SWITCH LED ILLUMINATION


    1. Check the LED illumination (power window regulator master switch assembly).


      1. Check that the LEDs located in the power window regulator master switch assembly illuminate when the light control switch is in the tail position.

        A01HXLHE05

    2. Check the LED illumination (power window regulator switch assembly).


      1. Check that the LED located in the power window regulator switch assembly illuminates when the light control switch is in the tail position.

        A01HXLHE05

    3. Check the LED illumination (rear power window regulator switch assembly).


      1. Check that the LED located in each rear power window regulator switch assembly illuminates when the light control switch is in the tail position.

        A01HXLHE05