ROOM TEMPERATURE SENSOR REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A01I27F

      Disengage the 10 claws and remove the front door scuff plate LH.

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01I1YY

      Remove the clip.

    2. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. A01HZ7V

      Disconnect the front door opening trim weatherstrip LH.

  4. REMOVE INSTRUMENT SIDE PANEL LH


    1. A01I23L

      Using a moulding remover, disengage the 4 claws as shown in the illustration.

    2. A01HZF4

      Disengage the 3 guides and remove the instrument side panel LH as shown in the illustration.

  5. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01I14J

      Disengage the claw and 2 guides to disconnect the hood lock control lever sub-assembly.

  6. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. A01I26P

      Remove the bolt <B> and screw <C> or <D>.

    2. A01HZC8

      Disengage the 4 claws, 9 clips and 3 guides to remove the lower No. 1 instrument panel finish panel assembly.

  7. REMOVE ROOM TEMPERATURE SENSOR (COOLER THERMISTOR)


    1. A01I1OI

      Disengage the 2 claws as shown in the illustration.

    2. Disconnect the cooler thermistor hose and connector, and remove the room temperature sensor (cooler thermistor).