CHILD RESTRAINT SEAT ANCHOR BRACKET REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. A01I27UE01

        Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.

        Standard Measurement
        a 100 mm (3.94 in.) or less

      2. Repeat the step above for the other hook.

    2. Remove the rear seat cushion assembly.

  4. REMOVE REAR SEAT CUSHION LOCK HOOK


    1. A01HXMA

      Disengage the claw and remove the rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure for the RH side and the LH side.

  5. REMOVE INNER LUGGAGE COMPARTMENT TRIM PAD


    1. A01HYOA

      Remove the inner luggage compartment trim pad.

  6. REMOVE REAR SEATBACK ASSEMBLY LH


    1. A01I0H9E01
      Text in Illustration
      *1 Fastener

      Disengage the 2 fasteners as shown in the illustration.

    2. A01HXW1

      Remove the 2 bolts and rear seatback assembly LH.

      Note

      Be careful not to damage the vehicle body.

  7. REMOVE REAR SEATBACK ASSEMBLY RH


    1. A01HYGSE01
      Text in Illustration
      *1 Fastener

      Disengage the 3 fasteners as shown in the illustration.

    2. A01HZS6

      Remove the 2 bolts and rear seatback assembly RH.

      Note

      Be careful not to damage the vehicle body.

  8. REMOVE REAR SIDE SEATBACK ASSEMBLY LH


    1. Disconnect the rear seat outer belt from the rear seat shoulder belt guide.

    2. Disconnect the connector.

    3. A01HZMU

      Remove the 2 bolts.

    4. Disengage the hook and remove the rear side seatback assembly LH.

  9. REMOVE REAR SIDE SEATBACK ASSEMBLY RH


    1. Disconnect the rear seat outer belt from the rear seat shoulder belt guide.

    2. Disconnect the connector.

    3. A01HZ75

      Remove the 2 bolts.

    4. Disengage the hook and remove the rear side seatback assembly RH.

  10. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH


    1. A01I1A1

      Remove the 2 nuts and child restraint seat anchor bracket sub-assembly LH.

  11. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH


    1. A01HY3H

      Remove the 2 nuts and child restraint seat anchor bracket sub-assembly RH.