LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMMK Made Power Seat) INSTALLATION


  1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. Install the 2 front seatback hooks to the lumbar support adjuster assembly.

    2. A01I0MD

      Engage the 2 guides.

    3. Engage the 4 claws to install the lumbar support adjuster assembly.

    4. Connect the connector.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Temporarily install the separate type front seatback cover with pad.

    2. Engage the 4 claws to install the 2 front seat headrest supports.

    3. Engage the 2 hooks.

      CAUTION:


      • For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after engage the 2 hooks.

      • Engage the 2 hooks securely.


      1. Slide each hook to engage them.

      2. Install the 4 clips.

    4. Engage the 2 fasteners.

    5. Engage the hook.

  3. CONNECT CONNECTORS


    1. A01HZV6E01

      Engage the claw (D) and 3 clamps (C) to install the front seat airbag assembly wire harness.

    2. Engage the clamp (B).

    3. Connect the connector (A).

    4. Connect the connector (E).

    5. Engage the clamp (F).

  4. CONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. Connect the 2 rubber bands of the separate type front seatback cover.

  5. INSTALL FRONT SEAT ASSEMBLY LH

    Click here