LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMMK Made Power Seat) REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HYY8

      Disconnect the 2 rubber bands of the separate type front seatback cover.

  3. DISCONNECT CONNECTORS


    1. A01HZV6E01

      Disconnect the connector (A).

    2. Disengage the clamp (B).

    3. Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.

    4. Disconnect the connector (E).

    5. Disengage the clamp (F).

  4. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01HZM7

      Disengage the hook.

    2. A01I0WQ

      Disengage the 2 fasteners.

    3. A01I0Q8

      Turn back the separate type front seatback cover.

    4. A01HXGI

      Disengage the 2 hooks.


      1. Remove the 4 clips.

      2. Slide each hook to disengage them.

    5. A01I0UR

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01I21A

      Remove the separate type front seatback cover with pad.

  5. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. A01HZM8

      Disconnect the connector.

    2. Disengage the 4 claws.

    3. Disengage the 2 guides to remove the lumbar support adjuster assembly.

    4. Remove the 2 front seatback hooks from the lumbar support adjuster assembly.