FRONT SEAT ASSEMBLY (for SIA Made Power Seat) DISASSEMBLY


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. A01HZTP

      Remove the 2 seat adjuster cover caps.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01HY5X

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01I0VW

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HYMG

      Disconnect the rubber band of the separate type front seatback cover.

  5. REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD


    1. A01I0QP

      Remove the screw.

    2. Disengage the 2 claws to remove the clip from the front No. 1 seat inner cushion shield as shown in the illustration.

    3. A01HXM7

      Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.

    4. A01HZ36

      Using a clip remover, remove the clip.

  6. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. A01HXGE

      Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.

    2. A01HXUUE01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 2 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

    6. A01HXMH

      Disconnect the front lumbar power seat switch connector.

  7. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. A01HY8Q

      Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.

    2. A01I1CUE01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 3 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

  8. REMOVE FRONT POWER SEAT SWITCH


    1. A01HZRK

      Remove the 3 screws and front power seat switch from the front seat cushion shield.

  9. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)


    1. A01I1ZM

      Disengage the 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.

  10. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. A01I1TW

      Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.

  11. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. A01I282

      Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.

  12. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Seat)


    1. Disengage each clamp under the front seat assembly.

    2. A01I1QH

      Disengage the clamp.

    3. Remove the nut and front seat inner belt assembly LH.

  13. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Seat)


    1. for TMMK Made:


      1. A01HYFA

        Disconnect the connector.

      2. Disengage the clamp.

      3. Remove the nut and front seat inner belt assembly RH.

    2. for SIA Made:


      1. Disconnect the connector under the front seat assembly.

      2. Disengage the clamp under the front seat assembly.

      3. A01HYCC

        Remove the nut and front seat inner belt assembly RH.

  14. REMOVE FRONT SEAT BELT ANCHOR PLATE


    1. Remove the front seat belt anchor plate.

  15. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A01HXHC

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. A01HZKI

      Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.

    3. w/ Seat Heater System:


      1. A01HYBJ

        Disconnect the connector.

      2. Disengage the clamp.

      3. A01I09N

        Disconnect the connector.

      4. Disengage the 2 clamps to separate the seat heater wire harness.

    4. A01HXP0

      Disengage the hook.

    5. A01HXHL

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  16. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01I14Q

      Remove the 2 hog rings.

    2. A01I1ZC

      Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  17. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)


    1. A01HY90

      Remove the 34 tag pins and the front seat cushion heater assembly from the separate type front seat cushion cover.

  18. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01I23B

      Remove the 5 hog rings.

    2. A01HY7J

      Remove the 3 hog rings.

    3. A01I027

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. A01HZG3

      Remove the 2 nuts and the 3 brackets.

    6. A01I0ZF

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  19. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A01HZ1T

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly or separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

  20. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HXHQ

      Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.

  21. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)


    1. A01HZPC

      Remove the 12 tag pins and the front seatback heater assembly from the separate type front seatback cover.

  22. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. A01I23R

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield LH.

  23. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    1. A01HXQO

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield RH.

  24. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER LH


    1. A01I1S8

      Disengage the 2 guides to remove the upper reclining adjuster inside cover LH.

  25. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER RH


    1. A01HYHU

      Disengage the 2 guides to remove the upper reclining adjuster inside cover RH.

  26. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)


    1. A01I04E

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  27. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)


    1. A01I136

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  28. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)


    1. A01HYEW

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  29. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)


    1. A01I1NC

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  30. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)


    1. A01HXXW

      Disconnect the connector.

    2. Disengage the 2 clamps and remove the seat heater control sub-assembly.

  31. REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side)


    1. A01HYB9E01
      Text in Illustration
      *1 Protective Tape

      Disconnect the 2 connectors.

    2. Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.

  32. REMOVE FRONT SEAT WIRE


    1. Disconnect the connectors and disengage the wire harness clamps to remove the front seat wire.

  33. REMOVE FRONT NO. 2 SEAT WIRE


    1. Disconnect the connectors and disengage the wire harness clamps to remove the front No. 2 seat wire.

  34. REMOVE FRONT SEAT WIRE RH (for Front Passenger Side)


    1. Disconnect the connectors and disengage the wire harness clamps to remove the front seat wire RH.

  35. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. A01HZPM

      Remove the 4 bolts

    2. Disengage the 4 guides to remove the separate type front seatback spring assembly.