FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:


    • The nuts must not be reused.

    • Make sure that the front seatback frame sub-assembly or separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.


    1. Install the front seat airbag assembly with 2 new nuts.

      Torque:
      for TMMK Made
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
      for SIA Made
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the 2 clamps.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for TMMK Made Manual Seat)


    1. Temporarily install the separate type front seatback cover with pad.

    2. Engage the 4 claws to install the 2 front seat headrest supports.

    3. Engage the 2 hooks.

      CAUTION:


      • For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after engaging the 2 hooks.

      • Engage the 2 hooks securely.


      1. Slide each hook to engage them.

      2. Install the 4 clips.

    4. Engage the 2 fasteners.

    5. Engage the hook.

  3. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for SIA Made Manual Seat)


    1. Temporarily install the separate type front seatback cover with pad.

    2. Engage the 4 claws to install the 2 front seat headrest supports.

    3. Install the 3 brackets with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      CAUTION:


      • For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after installing the nut.

      • Install the bracket securely.

    4. A01I1Z2

      Turn back the separate type front seatback cover.

    5. Using hog ring pliers, install the 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

    6. A01I13T

      Using hog ring pliers, install 3 new hog rings.

      Note

      Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

    7. A01I0BM

      Using hog ring pliers, install 5 new hog rings.

      Note


      • Be careful not to damage the separate type front seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

  4. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for TMMK Made Power Seat)


    1. Temporarily install the separate type front seatback cover with pad.

    2. Engage the 4 claws to install the 2 front seat headrest supports.

    3. Engage the 2 hooks.

      CAUTION:


      • For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after engage the 2 hooks.

      • Engage the 2 hooks securely.


      1. Slide each hook to engage them.

      2. Install the 4 clips.

    4. Engage the 2 fasteners.

    5. Engage the hook.

  5. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for SIA Made Power Seat)


    1. Temporarily install the separate type front seatback cover with pad.

    2. Engage the 4 claws to install the 2 front seat headrest supports.

    3. Install the 3 brackets with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      CAUTION:


      • For vehicles with side airbags, the separate type front seatback cover must be securely installed. Otherwise, the side airbags may not deploy properly.

      • Make sure that the strap is not twisted after installing the nut.

      • Install the bracket securely.

    4. A01I1Z2

      Turn back the separate type front seatback cover.

    5. Using hog ring pliers, install the 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

    6. A01HXK5

      Using hog ring pliers, install 3 new hog rings.

      Note

      Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

    7. A01I0DN

      Using hog ring pliers, install 5 new hog rings.

      Note


      • Be careful not to damage the separate type front seatback cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

  6. CONNECT AIRBAG WIRE HARNESS (for TMMK Made Manual Seat)


    1. Engage the claw and 3 clamps to connect the airbag wire harness.

    2. Connect the 2 rubber bands of the separate type front seatback cover with pad.

  7. CONNECT AIRBAG WIRE HARNESS (for SIA Made Manual Seat)


    1. Engage the claw and 3 clamps to connect the airbag wire harness.

    2. Engage the fastener to connect the airbag wire harness.

    3. Connect the rubber band of the separate type front seatback cover with pad.

  8. CONNECT AIRBAG WIRE HARNESS (for TMMK Made Power Seat)


    1. w/ Seat Heater System:


      1. A01HZV6E01

        Connect the connector (E).

      2. Engage the clamp (F).

    2. Engage the claw (D) and 3 clamps (C) to Connect the airbag wire harness.

    3. Engage the clamp (B).

    4. Connect the connector (A).

    5. Connect the 2 rubber bands of the separate type front seatback cover with pad.

  9. CONNECT AIRBAG WIRE HARNESS (for SIA Made Power Seat)


    1. w/ Seat Heater System:


      1. Connect the connector.

      2. Engage the clamp.

    2. Engage the claw and 3 clamps to Connect the airbag wire harness.

    3. Engage the fastener to connect the airbag wire harness.

    4. Connect the rubber band of the separate type front seatback cover with pad.

  10. INSTALL FRONT SEAT ASSEMBLY (for TMMK Made Manual Seat)

    Click here

  11. INSTALL FRONT SEAT ASSEMBLY (for SIA Made Manual Seat)

    Click here

  12. INSTALL FRONT SEAT ASSEMBLY (for TMMK Made Power Seat)

    Click here

  13. INSTALL FRONT SEAT ASSEMBLY (for SIA Made Power Seat)

    Click here

  14. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here