FRONT SEAT SIDE AIRBAG ASSEMBLY REMOVAL

CAUTION:


  • Be sure to read Precaution thoroughly before servicing Click here.

  • Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

  • If the side airbag was deployed, replace the front seat airbag assembly, front seatback frame sub-assembly or separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

    for TMMK Made Manual Seat: Click here

    for SIA Made Manual Seat: Click here

    for TMMK Made Power Seat: Click here

    for SIA Made Power Seat: Click here

Tech Tips

Use the same procedure for the LH side and RH side.


  1. REMOVE FRONT SEAT ASSEMBLY (for TMMK Made Manual Seat)

    Click here

  2. REMOVE FRONT SEAT ASSEMBLY (for SIA Made Manual Seat)

    Click here

  3. REMOVE FRONT SEAT ASSEMBLY (for TMMK Made Power Seat)

    Click here

  4. REMOVE FRONT SEAT ASSEMBLY (for SIA Made Power Seat)

    Click here

  5. DISCONNECT AIRBAG WIRE HARNESS (for TMMK Made Manual Seat)


    1. A01HY1E

      Disconnect the 2 rubber bands of the separate type front seatback cover with pad.

    2. A01I20E

      Disengage the claw and 3 clamps to disconnect the airbag wire harness.

  6. DISCONNECT AIRBAG WIRE HARNESS (for SIA Made Manual Seat)


    1. A01I10F

      Disconnect the rubber band of the separate type front seatback cover with pad.

    2. A01HYUL

      Disengage the fastener and separate the airbag wire harness.

    3. A01I1I9

      Disengage the claw and 3 clamps to disconnect the airbag wire harness.

  7. DISCONNECT AIRBAG WIRE HARNESS (for TMMK Made Power Seat)


    1. A01HYY8

      Disconnect the 2 rubber bands of the separate type front seatback cover with pad.

    2. A01HZV6E01

      Disconnect the connector (A).

    3. Disengage the clamp (B).

    4. Disengage the claw (D) and 3 clamps (C) to disconnect the airbag wire harness.

    5. w/ Seat Heater System:


      1. Disconnect the connector (E).

      2. Disengage the clamp (F).

  8. DISCONNECT AIRBAG WIRE HARNESS (for SIA Made Power Seat)


    1. A01I0XR

      Disconnect the rubber band of the separate type front seatback cover with pad.

    2. A01HXHC

      Disengage the fastener and separate the airbag wire harness.

    3. A01HYT9

      Disengage the claw and 3 clamps to disconnect the airbag wire harness.

    4. w/ Seat Heater System:


      1. A01HYBJ

        Disconnect the connector.

      2. Disengage the clamp.

  9. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for TMMK Made Manual Seat)


    1. A01HYVM

      Disengage the hook.

    2. A01I15H

      Disengage the 2 fasteners.

    3. A01HZC6

      Turn back the separate type front seatback cover.

    4. A01HXGI

      Disengage the 2 hooks.


      1. Remove the 4 clips.

      2. Slide each hook to disengage them.

    5. A01I0UR

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01I0VS

      Remove the separate type front seatback cover with pad.

  10. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for SIA Made Manual Seat)


    1. A01I1LQ

      Remove the 5 hog rings.

    2. A01HXPH

      Remove the 3 hog rings.

    3. A01I027

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. A01I108

      Remove the 2 nuts and the 3 brackets.

    6. A01I0ZF

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  11. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for TMMK Made Power Seat)


    1. A01HZM7

      Disengage the hook.

    2. A01I0WQ

      Disengage the 2 fasteners.

    3. A01I0Q8

      Turn back the separate type front seatback cover.

    4. A01HXGI

      Disengage the 2 hooks.


      1. Remove the 4 clips.

      2. Slide each hook to disengage them.

    5. A01I0UR

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01I21A

      Remove the separate type front seatback cover with pad.

  12. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for SIA Made Power Seat)


    1. A01I23B

      Remove the 5 hog rings.

    2. A01HY7J

      Remove the 3 hog rings.

    3. A01I027

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. A01HZG3

      Remove the 2 nuts and the 3 brackets.

    6. A01I0ZF

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  13. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A01HZ1T

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly or separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.