PRE-COLLISION SYSTEM WARNING BUZZER INSTALLATION


  1. INSTALL SKID CONTROL BUZZER ASSEMBLY


    1. Connect the connector.

    2. Engage the clamp to install the skid control buzzer assembly.

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. Engage the 4 claws, 9 clips and 3 guides.

    2. Install the lower No. 1 instrument panel finish panel assembly with the bolt <B> and screw <C> or <D>.

  3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.

  4. INSTALL INSTRUMENT SIDE PANEL LH


    1. Engage the 3 guides.

    2. A01I1E8

      Engage the 4 claws to install the instrument side panel LH as shown in the illustration.

  5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. A01I1B7E01
      Text in Illustration
      *1 Alignment Mark (Yellow)

      Align the alignment mark (Yellow) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.

      Note

      After installation, check that the corners fit correctly.

  6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    1. Engage the 2 clips.

    2. Install the cowl side trim sub-assembly LH with the clip.

  7. INSTALL FRONT DOOR SCUFF PLATE LH


    1. Engage the 10 claws to install the front door scuff plate LH.