ELECTRICAL KEY OSCILLATOR (for Front Floor) INSTALLATION


  1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Connect the connector.

    2. Install the No. 1 indoor electrical key antenna assembly with the bolt.

      Note

      Be careful when installing the indoor electrical key antenna assembly. If the antenna is dropped, replace it with a new one.

    3. Engage the clamp.

  2. INSTALL NO. 4 CONSOLE BOX DUCT (w/ Rear Register Duct)


    1. Engage the claw to install the No. 4 console box duct.

  3. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY


    1. Engage the 6 clips.

    2. Install the rear console upper panel sub-assembly with the 2 screws <C> or <D>.

    3. Connect the connector.

    4. Move the shift lever to P.

  4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01I042

      Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.

    2. A01HYYU

      Engage the 2 claws as shown in the illustration.

  5. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY


    1. w/ Seat Heater System:


      1. Connect each connector.

    2. Engage the 4 clips to install the upper console box sub-assembly.