FRONT DOOR LOCK INSPECTION


  1. INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH


    1. A01HYOEE21
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock with Motor Assembly LH)
      *b Unlock
      *c Lock

      Check the operation of the door lock motor.


      1. Apply battery voltage and check the operation of the door lock motor.

        OK
        Battery Connection Result

        Battery positive (+) → Terminal 4 (L)

        Battery negative (-) → Terminal 1 (UL)

        		 Locks

        Battery positive (+) → Terminal 1 (UL)

        Battery negative (-) → Terminal 4 (L)

        		 Unlocks

        If the result is not as specified, replace the front door lock with motor assembly LH.

    2. A01HYOEE22
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock with Motor Assembly LH)
      *b Unlock
      *c Lock

      Check the operation of the door unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (E) - 8 (LSSR) Locked 10 kΩ or higher
        7 (E) - 8 (LSSR) Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock with motor assembly LH.

    3. A01I1F0E01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock with Motor Assembly LH)
      *b Unlock
      *c Lock

      Check the operation of the door key lock and unlock switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        9 (L) - 7 (E) Held to lock side Below 1 Ω
        9 (L) - 7 (E) Neutral or held to unlock side 10 kΩ or higher
        10 (UL) - 7 (E) Held to unlock side Below 1 Ω
        10 (UL) - 7 (E) Neutral or held to lock side 10 kΩ or higher

        If the result is not as specified, replace the front door lock with motor assembly LH.

  2. INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY RH


    1. A01HZIWE23
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock with Motor Assembly RH)
      *b Unlock
      *c Lock

      Check the operation of the door lock motor.


      1. Apply battery voltage and check the operation of the door lock motor.

        OK
        Battery Connection Result

        Battery positive (+) → Terminal 4 (L)

        Battery negative (-) → Terminal 1 (UL)

        		 Locks

        Battery positive (+) → Terminal 1 (UL)

        Battery negative (-) → Terminal 4 (L)

        		 Unlocks

        If the result is not as specified, replace the front door lock with motor assembly RH.

    2. A01HXNXE01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock with Motor Assembly RH)
      *b Unlock
      *c Lock

      Check the operation of the door unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (LSSR) - 8 (E) Locked 10 kΩ or higher
        7 (LSSR) - 8 (E) Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock with motor assembly RH.