DOOR CONTROL TRANSMITTER (w/o Smart Key System) REMOVAL


  1. REMOVE TRANSMITTER HOUSING COVER (for Type A)


    1. A01I0DDE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.

      Note

      Do not forcibly pry the cover.

      Tech Tips


      • Tape the screwdriver tip before use.

      • Please work as shown in the figure so as not to drop the button.

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type A)


    1. A01I1MNE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.

      Note

      Handle each part with care as they are delicate electrical parts.

      Tech Tips


      • Tape the screwdriver tip before use.

      • When removing the module, please attention to drop the button.

  3. REMOVE TRANSMITTER HOUSING COVER (for Type B)


    1. A01HXORE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.

      Note

      Do not forcibly pry the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type B)


    1. A01HZ6AE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.

      Note

      Handle each part with care as they are delicate electrical parts.

      Tech Tips

      Tape the screwdriver tip before use.