DOOR CONTROL TRANSMITTER (w/ Smart Key System) REMOVAL


  1. REMOVE TRANSMITTER BATTERY

    Note

    Take extra care when handling these precision electronic components.


    1. for Type A:


      1. A01HXO3

        Push the release hook knob and extract the mechanical key.

      2. A01I278E01
        Text in Illustration
        *1 Protective Tape

        Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

        Tech Tips

        Tape the screwdriver tip before use.

      3. A01HXUKE01
        Text in Illustration
        *1 Protective Tape

        Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).

        Note


        • Do not push the terminals with your finger.

        • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

        • Do not touch the transmitter battery with wet hands. Water may cause rust.

        • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

        Tech Tips

        Tape the screwdriver tip before use.

    2. for Type B:


      1. A01HXO3

        Push the release hook knob and extract the mechanical key.

      2. A01I278E01
        Text in Illustration
        *1 Protective Tape

        Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

        Tech Tips

        Tape the screwdriver tip before use.

      3. A01HZW2

        Disengage the 2 claws and remove the cover.

      4. A01I0ZVE01
        Text in Illustration
        *1 Protective Tape

        Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).

        Note


        • Do not push the terminals with your finger.

        • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

        • Do not touch the transmitter battery with wet hands. Water may cause rust.

        • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

        Tech Tips

        Tape the screwdriver tip before use.