TRANSMITTER BATTERY (w/o Smart Key System) REPLACEMENT


  1. REMOVE TRANSMITTER HOUSING COVER (for Type A)


    1. A01I0DDE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.

      Note

      Do not forcibly pry the cover.

      Tech Tips


      • Tape the screwdriver tip before use.

      • Please work as shown in the figure so as not to drop the button.

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type A)


    1. A01I1MNE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.

      Note

      Handle each part with care as they are delicate electrical parts.

      Tech Tips


      • Tape the screwdriver tip before use.

      • When removing the module, please attention to drop the button.

  3. REMOVE TRANSMITTER BATTERY (for Type A)


    1. A01HYCX

      Twist the coin in the direction of the arrow in the illustration, and remove the transmitter battery cover.

    2. A01HZTT

      Remove the transmitter battery (lithium battery: CR2016).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

  4. REMOVE TRANSMITTER HOUSING COVER (for Type B)


    1. A01HXORE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.

      Note

      Do not forcibly pry the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type B)


    1. A01HZ6AE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.

      Note

      Handle each part with care as they are delicate electrical parts.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE TRANSMITTER BATTERY (for Type B)


    1. A01I1XK

      Twist the coin in the direction of the arrow in the illustration, and remove the transmitter battery cover.

    2. A01I14P

      Remove the transmitter battery (lithium battery: CR2016).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

  7. INSTALL TRANSMITTER BATTERY (for Type A)


    1. A01HYRE

      Install a transmitter battery (lithium battery: CR2016) with the positive (+) side facing upward, as shown in the illustration.

      Note


      • Be careful not to bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    2. A01HYJV

      Install the cover.

  8. INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type A)


    1. A01I27S

      Install the door control transmitter module set sub-assembly into the transmitter housing case.

  9. INSTALL TRANSMITTER HOUSING COVER (for Type A)


    1. A01I0FG

      Install the transmitter housing cover to the transmitter housing case.

  10. INSTALL TRANSMITTER BATTERY (for Type B)


    1. A01I19B

      Install a transmitter battery (lithium battery: CR2016) with the positive (+) side facing upward, as shown in the illustration.

      Note


      • Be careful not to bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    2. A01I00G

      Install the cover.

  11. INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type B)


    1. A01HYXC

      Install the door control transmitter module set sub-assembly into the transmitter housing case.

  12. INSTALL TRANSMITTER HOUSING COVER (for Type B)


    1. A01I0DW

      Install the transmitter housing cover to the transmitter housing case.

    2. Check that the transmitter LED illuminates when the switch is pressed.

      OK
      Transmitter LED illuminates when switch is pressed.