SAFETY CONNECT SYSTEM RED INDICATOR REMAINS ON

DESCRIPTION

When the red indicator remains on, this means that the DCM (Telematics Transceiver) has detected a malfunction in the safety connect system and set a DTC.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC

   
   

   1. Turn the engine switch off.

   2. Connect the Techstream to the DLC3.

   3. Turn the engine switch on (IG) and wait for 10 seconds.

   4. Turn the Techstream on.

   5. Perform "Health Check" and check for current DTCs Click here.

      Result
      Result Proceed to DTC is not output A DTC is output B

   
   

   B

   GO TO DIAGNOSTIC TROUBLE CODE CHART Click here

   A

2. REPLACE DCM (TELEMATICS TRANSCEIVER)

   
   

   1. Replace the DCM (Telematics Transceiver) Click here.

      Note

      
      

      • The engine switch must be off.

      • Do not swap the DCM (Telematics Transceiver) with one from another vehicle.

   
   

   NEXT

   PERFORM DCM ACTIVATION Click here