ULTRASONIC SENSOR (for Rear Side) REMOVAL


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 2 LUGGAGE ROOM WIRE

    Tech Tips

    Use the same procedure for all connectors.


    1. A01I1G9

      Disengage the clamp.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

    2. Disconnect the connector to remove the No. 2 luggage room wire.

  3. REMOVE ULTRASONIC SENSOR CLIP

    Tech Tips

    Use the same procedure for all ultrasonic sensor clips.


    1. A01I19L

      Disengage the 4 claws to remove the ultrasonic sensor clip.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  4. REMOVE NO. 1 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensors.


    1. A01HY5E

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  5. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER

    Tech Tips

    Use the same procedure for all No. 2 ultrasonic sensor retainers.


    1. A01I07Y

      Disengage the 2 claws to remove the No. 2 ultrasonic sensor retainer from the rear bumper assembly.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.