REAR VIEW MONITOR SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the Techstream on.

    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

    5. Check for DTCs Click here.

      Note

      The navigation receiver assembly*1 or radio and display receiver assembly*2 outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the rear view monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.

      System Proceed to
      Navigation System*1

      Click here

      Audio and Visual System (w/o DVD Player)*2

      Click here


      • *1: for Navigation System

      • *2: for Audio and Visual System (w/o DVD Player)

  2. CLEAR DTC


    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the Techstream on.

    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

    5. Clear the DTCs.