Tech Tips
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
When an open circuit indication is displayed by the self-check function, check for DTCs and troubleshoot according to each inspection procedure.
| Symptom | Suspected Area | See page |
|---|---|---|
| System does not operate at all | Proceed to "Clearance Warning ECU Assembly Power Source Circuit" | |
| Proceed to "Clearance Sonar Main Switch Circuit" | ||
| System cannot be turned off | Proceed to "Clearance Sonar Main Switch Circuit" |
| Symptom | Suspected Area | See page |
|---|---|---|
| Combination meter assembly (shift position indicator) operates normally, but detection operates when shift lever is in P, or detection does not operate when shift lever is in any position other than P (front sonar) | CAN communication system | |
| Clearance warning ECU assembly | ||
| Combination meter assembly (shift position indicator) operates normally, but detection operates when shift lever is in any position other than R, or does not operate with shift lever in R (rear sonar) | CAN communication system | |
| Clearance warning ECU assembly | ||
| Combination meter assembly (speedometer) operates normally, but detection does not operate when vehicle speed meets operation condition, or detection operates when vehicle speed does not meet operation condition (front sonar) | CAN communication system | |
| Clearance warning ECU assembly |
| Symptom | Suspected Area | See page |
|---|---|---|
| Sonar detection operation is normal but buzzer operation is intermittent | Proceed to "Clearance Warning Buzzer Circuit" | |
| Clearance warning ECU assembly |
| Symptom | Suspected Area | See page |
|---|---|---|
| Detection operation is normal but all sonar displays do not appear on multi-information display and multi-display | CAN communication system | |
| Clearance warning ECU assembly | ||
| Detection operation is normal but sonar displays do not appear on multi-information display | CAN communication system | |
| Combination meter assembly | ||
| Clearance warning ECU assembly | ||
| When the shift lever is not in P or R, detection operation is normal but sonar display does not appear on multi-display | CAN communication system | |
| Radio and display receiver assembly | ||
| Clearance warning ECU assembly | ||
| When the shift lever is in R, detection operation is normal but sonar display does not appear on multi-display | CAN communication system | |
| Radio and display receiver assembly | ||
| Rear television camera assembly | ||
| Clearance warning ECU assembly |