NAVIGATION RECEIVER INSTALLATION


  1. INSTALL NAVIGATION RECEIVER ASSEMBLY

  2. INSTALL STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio)

  3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. Engage the 2 clips to install the air conditioning control assembly.

  4. INSTALL NO. 1 RADIO RECEIVER BRACKET


    1. w/o Satellite Radio:


      1. Install the No. 1 radio receiver bracket with the 5 screws.

    2. w/ Satellite Radio:


      1. Install the No. 1 radio receiver bracket with the 7 screws.

  5. INSTALL NO. 2 RADIO RECEIVER BRACKET


    1. w/o Satellite Radio:


      1. Install the No. 2 radio receiver bracket with the 5 screws.

    2. w/ Satellite Radio:


      1. Install the No. 2 radio receiver bracket with the 7 screws.

  6. INSTALL NAVIGATION WIRE (w/ Satellite Radio)


    1. Connect each connector to install the navigation wire.

  7. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY


    1. Connect each connector.

    2. Engage the 4 clips to the vehicle body to temporarily install the navigation receiver assembly with air conditioning control assembly.

    3. Install the navigation receiver assembly with air conditioning control assembly with the 4 bolts and 2 screws.

  8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. A01HZ24

      Engage the guide and 2 clips as shown in the illustration.

    3. Install the upper console panel sub-assembly with the 2 screws <C> or <D>.

  9. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. Connect the connector.

    2. Engage the clamp.

    3. A01I0HB

      Engage the 11 clips to install the No. 1 speaker opening cover assembly as shown in the illustration.

  10. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY


    1. Engage the 6 clips.

    2. Install the rear console upper panel sub-assembly with the 2 screws <C> or <D>.

    3. Connect the connector.

    4. Move the shift lever to P.

  11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01I042

      Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.

    2. A01HYYU

      Engage the 2 claws as shown in the illustration.

  12. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY


    1. w/ Seat Heater System:


      1. Connect each connector.

    2. Engage the 4 clips to install the upper console box sub-assembly.

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  14. REPLACED OPERATION (w/ Parking Assist Monitor System)

    Click here