SATELLITE RADIO TUNER REMOVAL


  1. PRECAUTION (w/ Navigation System)

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Navigation System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here

  3. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY


    1. A01I0TR

      Disengage the 4 clips and remove the upper console box sub-assembly.

    2. w/ Seat Heater System:


      1. Disconnect each connector.

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01HZU2

      Disengage the 2 claws as shown in the illustration.

    2. A01HY0M

      Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.

  5. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. A01HZSN

      Disconnect the connector.

    3. Remove the 2 screws <C> or <D>.

    4. A01HXNR

      Disengage the 6 clips and remove the rear console upper panel sub-assembly.

  6. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. A01HZDD

      Using a moulding remover, disengage the 11 clips as shown in the illustration.

    2. Disconnect the connector to remove the No. 1 speaker opening cover assembly.

  7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01HZFH

      Remove the 2 screws <C> or <D>.

    2. A01I0CZ

      Disengage the 2 clips and guide as shown in the illustration.

    3. Disconnect each connector to remove the upper console panel sub-assembly.

  8. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)


    1. A01I0H4E01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the areas shown in the illustration.

    2. A01HZNO

      Remove the 4 bolts and 2 screws.

    3. A01HXX9

      Pull the radio receiver assembly with air conditioning control assembly toward the rear of the vehicle to disengage the 4 clips.

    4. Disconnect each connector and remove the radio receiver assembly with air conditioning control assembly.

  9. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)


    1. A01HXX2E01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the areas shown in the illustration.

    2. A01HZ9J

      Remove the 4 bolts and 2 screws.

    3. A01HYTY

      Pull the navigation receiver assembly with air conditioning control assembly toward the rear of the vehicle to disengage the 4 clips.

    4. Disconnect each connector and remove the navigation receiver assembly with air conditioning control assembly.

  10. REMOVE NAVIGATION WIRE


    1. A01HXJK

      Disconnect each connector to remove the navigation wire.

  11. REMOVE NO. 1 RADIO RECEIVER BRACKET


    1. w/o Satellite Radio:


      1. A01HXQ1

        Remove the 5 screws and No. 1 radio receiver bracket.

    2. w/ Satellite Radio:


      1. A01I1N1

        Remove the 7 screws and No. 1 radio receiver bracket.

  12. REMOVE NO. 2 RADIO RECEIVER BRACKET


    1. w/o Satellite Radio:


      1. A01I1MR

        Remove the 5 screws and No. 2 radio receiver bracket.

    2. w/ Satellite Radio:


      1. A01I04U

        Remove the 7 screws and No. 2 radio receiver bracket.

  13. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. A01I13J

      Disengage the 2 clips to remove the air conditioning control assembly.

  14. REMOVE STEREO COMPONENT TUNER ASSEMBLY