INSPECTION PROCEDURE
PROCEDURE
CHECK IMAGE QUALITY SETTING
Turn the light control switch to the tail or head position.
Check that the daytime screen setting on the display adjustment screen is set to on.
Result | ||||||
---|---|---|---|---|---|---|
|
B |
CHECK VEHICLE SIGNAL (OPERATION CHECK) Click here |
A |
CHANGE DAYTIME SCREEN SETTING TO OFF
CHECK VEHICLE SIGNAL (OPERATION CHECK)
Enter the "Vehicle Signal Check Mode" screen.
Refer to Check Vehicle Signal in Operation Check Click here.
Check that the display changes between ON and OFF according to the light control switch operation.
OK | ||||||
---|---|---|---|---|---|---|
|
Tech Tips
The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
NG |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here |
OK |
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here