DESCRIPTION
The power steering ECU assembly outputs this DTC when it determines that the assist map is not written in the ECU.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1581 | Assist map not written in power steering ECU assembly |
|
INSPECTION PROCEDURE
Note
If the power steering ECU assembly has been replaced, perform assist map writing Click here).
PROCEDURE
PERFORM ASSIST MAP WRITING
Perform the assist map writing Click here.
| NEXT |
|
CHECK FOR DTC
Check for DTCs Click here.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
*: Perform the assist map writing again if DTC C1581 is still output even after the assist map writing is performed once or twice.
| B |
|
PERFORM ASSIST MAP WRITING AGAIN Click here |
| C |
|
END |
| A |
|
CHECK FOR DTC (CAN COMMUNICATION SYSTEM)
Check for DTCs Click here.
| OK |
|---|
| DTC is not output. |
Tech Tips
If the CAN communication system DTC is output, first troubleshoot the CAN communication system malfunction, then perform the assist map writing again Click here.
| NG |
|
GO TO CAN COMMUNICATION SYSTEM Click here |
| OK |
|
CHECK FOR DTC (SFI SYSTEM)
Check for DTCs of the SFI system Click here.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO SFI SYSTEM Click here |
| A |
|
CHECK FOR DTC (VEHICLE STABILITY CONTROL SYSTEM)
Check for DTCs of the vehicle stability control system Click here.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO VEHICLE STABILITY CONTROL SYSTEM Click here |
| A |
|
REPLACE POWER STEERING ECU ASSEMBLY Click here