BRAKE PEDAL REMOVAL


  1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

    Click here

  2. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY (w/ Automatic Headlight Beam Level Control System)


    1. A01I1OXE01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the bolt.

    4. Disengage the 2 guides and remove the headlight leveling ECU assembly.

  3. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. A01I0Q0

      Disconnect the connector.

    2. A01HZ9P

      Turn the stop light switch assembly counterclockwise and remove it.

  4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  5. REMOVE PUSH ROD PIN


    1. A01HZ1X

      Remove the clip and push rod pin.

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  6. REMOVE BRAKE PEDAL RETURN SPRING


    1. A01I16C

      Remove the brake pedal return spring from the brake pedal support assembly.

  7. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A01HZVH

      Disconnect the brake pedal load sensing switch connector and disengage the clamp.

    2. A01HZP0

      Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.

    3. A01I0KT

      Remove the 4 nuts and brake pedal support assembly.