VSC OFF SWITCH REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. A01HZ7V

      Disconnect the front door opening trim weatherstrip LH.

  4. REMOVE INSTRUMENT SIDE PANEL LH


    1. A01I23L

      Using a moulding remover, disengage the 4 claws as shown in the illustration.

    2. A01HZF4

      Disengage the 3 guides and remove the instrument side panel LH as shown in the illustration.

  5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. A01HXFQ

      Disengage the 3 clips to remove the No. 1 instrument cluster finish panel garnish as shown in the illustration.

  6. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01HXUME01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. A01HXSO

      Disengage the 2 clips as shown in the illustration.

    3. A01HYOX

      Using a moulding remover, disengage the 2 clips to remove the No. 1 instrument panel register assembly.

  7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. Operate the tilt and telescopic lever to fully extend and lower the steering column assembly.

    2. A01I1J7

      Using a moulding remover, disengage the 2 claws, 4 clips and 2 guides.

    3. A01HXM9

      Disengage the 5 claws, 5 clips and 2 guides.

    4. Disconnect each connector.

    5. A01I20W

      Remove the instrument cluster finish panel assembly as shown in the illustration.

  8. REMOVE VSC OFF SWITCH


    1. A01I284

      Disengage the 2 claws and remove the VSC OFF switch from the instrument cluster finish panel assembly.