TIRE AND WHEEL SYSTEM INSPECTION


  1. INSPECT TIRES


    1. Check the tires for wear and proper inflation pressure.

      Cold Tire Inflation Pressure
      Tire Size

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)
      P205/65R16 94S 240 (2.4, 35)
      P215/55R17 93V

      240 (2.4, 35)*1

      210 (2.1, 30)*2
      P225/45R18 91V 230 (2.3, 33)

      *1: except Mexico

      *2: for Mexico

    2. A01HXTA

      Using a dial indicator, check the runout of the tires.

      Maximum Tire Runout
      1.4 mm (0.0551 in.)

  2. ROTATE TIRES


    1. A01I1NBE03

      Rotate the tires as shown in illustration (A). If the vehicle is equipped with a full size spare tire, rotate the tires as shown in illustration (B).

      Text in Illustration
      A01I0B8 Front
      Torque:
      103 N*m  { 1049 kgf*cm, 76 ft.*lbf }

  3. INSPECT AND ADJUST WHEEL BALANCE


    1. Inspect and adjust the off-the-car balance.


      1. Steel wheel:

        Maximum Imbalance
        8.0 g (0.0176 lb)
      2. A01HZVIE10
        Text in Illustration
        *a 25 mm (0.984 in.)

        Others (Non-steel wheel):

        Maximum Imbalance
        8.0 g (0.0176 lb)

        Note


        • Use a cleaning detergent to remove dirt, oil and water from the surface where the balance weight is to be adhered.

        • Do not touch the adhesive surface of the balance weight.

        • Adhere a stick-on type balance weight to the flat surface*a shown in the illustration.

        • Push the balance weight with your finger to securely adhere it to the desired position.

        • Do not reuse balance weights.

        Tech Tips

        Use clip-on type balance weights for the inner side, and stick-on type balance weights for the outer side.

  4. INSPECT FRONT AXLE HUB BEARING

    Click here

  5. INSPECT REAR AXLE HUB BEARING

    Click here