REAR STABILIZER BAR REMOVAL


  1. REMOVE REAR WHEELS

  2. REMOVE NO. 2 FLOOR UNDER COVER (w/ Floor Under Cover)


    1. A01I11A

      Remove the 2 bolts, screw and 2 clips.

      Text in Illustration
      A01I0B8 Bolt
      A01HZQC Screw
      A01HYKN Nut (attached to under cover)

    2. Disengage the 3 nuts and remove the No. 2 floor under cover.

  3. REMOVE NO. 1 FLOOR UNDER COVER


    1. A01I1YN

      Remove the 2 bolts and screw.

      Text in Illustration
      A01I0B8 Bolt
      A01HZQC Screw
      A01HYKN Nut (attached to under cover)

    2. Disengage the 3 nuts and 2 clips, and remove the No. 1 floor under cover.

  4. REMOVE REAR STABILIZER LINK ASSEMBLY LH


    1. A01HXTB

      Remove the nut and separate the rear stabilizer link assembly LH from the rear shock absorber with coil spring.

      If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.

    2. A01HZWF

      Remove the nut and rear stabilizer link assembly LH from the rear stabilizer bar.

      If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.

  5. REMOVE REAR STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  6. REMOVE REAR STABILIZER BAR


    1. A01I0K8

      Remove the 4 nuts, rear stabilizer bar, 2 rear No. 1 stabilizer bar brackets, 2 rear No. 2 stabilizer bar brackets and 2 rear stabilizer bushings from the rear suspension member sub-assembly.

  7. REMOVE REAR NO. 2 STABILIZER BAR BRACKET


    1. Remove the 2 rear No. 2 stabilizer bar brackets from the rear stabilizer bar.

  8. REMOVE REAR NO. 1 STABILIZER BAR BRACKET


    1. Remove the 2 rear No. 1 stabilizer bar brackets from the rear stabilizer bar.

  9. REMOVE REAR STABILIZER BUSHING


    1. Remove the 2 rear stabilizer bushings from the rear stabilizer bar.