FRONT SUSPENSION MEMBER (When Not Using the Engine Support Bridge) REMOVAL


  1. REMOVE FRONT FRAME ASSEMBLY

    for 2GR-FE: Click here

    for 2AR-FE: Click here

  2. REMOVE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE)

    Click here

  3. REMOVE FRONT ENGINE MOUNTING INSULATOR (for 2AR-FE)

    Click here

  4. REMOVE ENGINE MOUNTING INSULATOR LH

    for 2GR-FE: Click here

    for 2AR-FE: Click here

  5. REMOVE ENGINE MOUNTING INSULATOR RH

    for 2GR-FE: Click here

    for 2AR-FE: Click here

  6. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    1. A01I0S6

      Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.

  7. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as the LH side.

  8. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY


    1. Remove the front stabilizer bar with 2 front stabilizer link assemblies from the front frame assembly.

  9. REMOVE STEERING LINK ASSEMBLY


    1. A01HZG0

      Remove the 2 bolts, 2 nuts and steering link assembly.

      Note

      Keep the nut from rotating while turning the bolt because the nut has its own stopper.

  10. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH


    1. A01HY1Q

      Remove the 3 bolts, nut and front lower No. 1 suspension arm sub-assembly from the front frame assembly.

      Note

      When removing the bolt, keep the nut from rotating.

    2. Remove the front lower arm bushing stopper from the front lower No. 1 suspension arm sub-assembly.

  11. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  12. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER


    1. A01I0EZ

      Remove the 2 bolts and front suspension member dynamic damper from the front frame assembly.

  13. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER


    1. Remove the 2 front suspension member body mounting front stoppers from the front frame assembly.

  14. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER


    1. Remove the 2 front suspension member body mounting rear stoppers from the front frame assembly.

  15. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION


    1. A01HYLEE03
      Text in Illustration
      *1 Front Suspension Member Body Mounting Front Cushion

      Install SST as shown in the illustration.

      SST
      09830-10010   ( 09830-01010, 09830-01040, 09830-01050 )
      09950-40011   ( 09951-04020, 09952-04010, 09954-04010, 09955-04011, 09958-04011 )
    2. A01I212E05
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the front suspension member body mounting front cushion from the front frame assembly.

      Note


      • Make sure that the claws of SST are securely hung onto the mounting cushion.

      • Tighten SST slowly and evenly.

      • Be careful as the mounting cushion may fly out.

      • The mounting cushion cannot be reused.

  16. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH


    1. A01HYLEE03
      Text in Illustration
      *1 Front Suspension Member Body Mounting Rear Cushion LH

      Install SST as shown in the illustration.

      SST
      09830-10010   ( 09830-01010, 09830-01040, 09830-01050 )
      09950-40011   ( 09951-04020, 09952-04010, 09954-04010, 09955-04011, 09958-04011 )
    2. A01HYE3E05
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the front suspension member body mounting rear cushion LH from the front frame assembly.

      Note


      • Make sure that the claws of SST are securely hung onto the mounting cushion.

      • Tighten SST slowly and evenly.

      • Be careful as the mounting cushion may fly out.

      • The mounting cushion cannot be reused.

  17. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH

    Tech Tips

    Perform the same procedure as the LH side.

  18. REMOVE HOLE PLUG


    1. Remove each hole plug from the front frame assembly.