FRONT LOWER SUSPENSION ARM (for 2GR-FE) REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed is for the LH side.


  1. REMOVE FRONT FRAME ASSEMBLY

    When Using the Engine Support Bridge: Click here

    When Not Using the Engine Support Bridge: Click here

  2. REMOVE ENGINE MOUNTING INSULATOR (When Not Using the Engine Support Bridge)


    1. A01I0NN

      Remove the 2 hole plugs from the front frame assembly.

    2. Remove the 3 nuts and engine mounting insulator LH.

      Tech Tips

      Perform this procedure only when replacement of the engine mounting insulator LH is necessary.

  3. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY


    1. A01HY1Q

      Remove the 3 bolts, nut and front lower No. 1 suspension arm sub-assembly from the front frame assembly.

      Note

      When removing the bolt, keep the nut from rotating.

    2. Remove the front lower arm bushing stopper from the front lower No. 1 suspension arm sub-assembly.