DIFFERENTIAL OIL SEAL REPLACEMENT


  1. DRAIN AUTOMATIC TRANSAXLE FLUID


    1. Remove the front wheel opening extension pad LH, engine under cover LH and front fender apron seal LH.

    2. A01I196

      Remove the refill plug and gasket from the automatic transaxle assembly.

    3. A01HY4FE03
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Overflow Plug
      *3 Hexagon Socket Wrench

      Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the automatic transaxle assembly.

    4. A01I1REE04
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Hexagon Socket Wrench
      *a Overflow Plug Hole

      Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the automatic transaxle assembly.

    5. Drain automatic transaxle fluid from the automatic transaxle assembly.

    6. A01I1REE04
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Hexagon Socket Wrench
      *a Overflow Plug Hole

      Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the automatic transaxle assembly.

      Torque:
      0.8 N*m  { 8 kgf*cm, 7 in.*lbf }
    7. A01HY4FE03
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Overflow Plug
      *3 Hexagon Socket Wrench

      Using a 6 mm hexagon socket wrench, install a new gasket and the overflow plug to the automatic transaxle assembly.

      Torque:
      40 N*m  { 408 kgf*cm, 29 ft.*lbf }
    8. A01I196

      Install a new gasket and the refill plug to the automatic transaxle assembly.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

  2. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    Click here

  3. REMOVE TRANSAXLE CASE OIL SEAL


    1. A01HZDCE01

      Using SST, tap out the transaxle case oil seal.

      SST
      09308-00010

  4. REMOVE DRIVE SHAFT BEARING BRACKET


    1. A01I20Z

      Remove the 3 bolts and drive shaft bearing bracket.

  5. REMOVE FRONT TRANSAXLE CASE OIL SEAL


    1. A01HZHXE01

      Using SST, tap out the front transaxle case oil seal.

      SST
      09308-00010

  6. INSTALL FRONT TRANSAXLE CASE OIL SEAL


    1. A01HYUME01

      Using SST and a hammer, tap in a new front transaxle case oil seal.

      SST
      09316-60011   ( 09316-00011 )
      Oil seal driven in depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Check that the oil seal is installed in the correct direction.

    2. Coat the lip of the front transaxle case oil seal with MP grease.

  7. INSTALL DRIVE SHAFT BEARING BRACKET


    1. Install the drive shaft bearing bracket with the 3 bolts.

      Torque:
      64 N*m  { 653 kgf*cm, 47 ft.*lbf }

  8. INSTALL TRANSAXLE CASE OIL SEAL


    1. A01HZKHE01

      Using SST and a hammer, tap in a new transaxle case oil seal.

      SST
      09316-10010
      09950-70010   ( 09951-07150 )
      Oil seal driven in depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Check that the oil seal is installed in the correct direction.

    2. Coat the lip of the transaxle case oil seal with MP grease.

  9. INSTALL FRONT DRIVE SHAFT HOLE SNAP RING LH


    1. Install a new front drive shaft hole snap ring LH.

      Note

      Face the end gap of the front drive shaft hole snap ring downward.

  10. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    Click here

  11. ADD AUTOMATIC TRANSAXLE FLUID

    Click here