TRANSMISSION WIRE INSTALLATION


  1. INSTALL TRANSMISSION WIRE


    1. Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

    2. Coat the temperature sensor with ATF.

    3. Install the temperature sensor and lock plate to the transmission valve body assembly with the bolt.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

    4. Engage the clamp.

    5. Connect the 7 shift solenoid valve connectors.

    6. Connect the speed sensor connector.

  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY (When Using the Engine Support Bridge)

    Click here

  3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY (When Not Using the Engine Support Bridge)

    Click here