SPEED SENSOR INSTALLATION


  1. INSTALL SPEED SENSOR


    1. A01HXSLE03

      Temporarily install the speed sensor to the transmission valve body assembly with the 2 bolts.

      Note

      Do not use a speed sensor that has been dropped.

    2. Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }

    3. Connect the speed sensor connector.

  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY (When Using the Engine Support Bridge)

    Click here

  3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY (When Not Using the Engine Support Bridge)

    Click here