OIL COOLER REMOVAL


  1. DRAIN AUTOMATIC TRANSAXLE FLUID


    1. Remove the front wheel opening extension pad LH, engine under cover LH and front fender apron seal LH.

    2. A01I196

      Remove the refill plug and gasket from the automatic transaxle assembly.

    3. A01HY4FE03
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Overflow Plug
      *3 Hexagon Socket Wrench

      Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the automatic transaxle assembly.

    4. A01I1REE04
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Hexagon Socket Wrench
      *a Overflow Plug Hole

      Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the automatic transaxle assembly.

    5. Drain automatic transaxle fluid from the automatic transaxle assembly.

    6. A01I1REE04
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Hexagon Socket Wrench
      *a Overflow Plug Hole

      Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the automatic transaxle assembly.

      Torque:
      0.8 N*m  { 8 kgf*cm, 7 in.*lbf }
    7. A01HY4FE03
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Overflow Plug
      *3 Hexagon Socket Wrench

      Using a 6 mm hexagon socket wrench, install a new gasket and the overflow plug to the automatic transaxle assembly.

      Torque:
      40 N*m  { 408 kgf*cm, 29 ft.*lbf }
    8. A01I196

      Install a new gasket and the refill plug to the automatic transaxle assembly.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

  2. DRAIN ENGINE COOLANT

    Note

    Do not remove the radiator cap sub-assembly or radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. Loosen the radiator drain cock plug.

    2. Remove the radiator cap sub-assembly.

      A01I018E01
      Text in Illustration
      *1 Radiator Cap Sub-assembly *2 Radiator Drain Cock Plug

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

  3. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01HXU2

      Remove the 9 clips and cool air intake duct seal.

  4. REMOVE INLET AIR CLEANER ASSEMBLY


    1. A01HZUJ

      Remove the 2 bolts and inlet air cleaner assembly.

  5. REMOVE TRANSMISSION OIL COOLER


    1. A01HXHD

      Disconnect the No. 3 water by-pass hose, No. 4 water by-pass hose, No. 1 oil cooler outlet hose and No. 1 oil cooler inlet hose from the transmission oil cooler.

    2. A01I091

      Remove the 3 bolts and transmission oil cooler from the front engine mounting bracket.