SHIFT PADDLE SWITCH INSPECTION


  1. INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)


    1. A01I0YGE04
      Text in Illustration
      *a

      Component without harness connected

      (transmission shift switch LH)
      *b

      Component without harness connected

      (transmission shift switch RH)

      Measure the resistance between each terminal when the shift paddle switch is moved to each position.

      Standard Resistance
      Transmission Shift Switch LH:
      Tester Connection Switch Condition Specified Condition
      3 (ECC) - 2 (SFTD)

      Pull "-" continuously

      (Down-shift)

      		 Below 1 Ω
      Release 10 kΩ or higher
      4 (ECC1) - 2 (SFTD)

      Pull "-" continuously

      (Down-shift)

      		 Below 1 Ω
      Release 10 kΩ or higher
      Transmission Shift Switch RH:
      Tester Connection Switch Condition Specified Condition
      3 (SFTU) - 2 (ECC1)

      Pull "+" continuously

      (Up-shift)

      		 Below 1 Ω
      Release 10 kΩ or higher

      If the resistance values are not as specified, replace the shift paddle switch (transmission shift switch assembly).