PARK / NEUTRAL POSITION SWITCH INSPECTION


  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01I27EE05
      Text in Illustration
      *a

      Component without harness connected

      (Park/Neutral Position Switch)

      Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

      Standard Resistance
      Tester Connection Shift Lever Position Specified Condition

      1 (RB) - 3 (PL)

      4 (B) - 9 (L)

      		 P Below 1 Ω
      Except P 10 kΩ or higher
      1 (RB) - 2 (RL) R Below 1 Ω
      Except R 10 kΩ or higher

      1 (RB) - 8 (NL)

      4 (B) - 9 (L)

      		 N Below 1 Ω
      Except N 10 kΩ or higher
      1 (RB) - 7 (DL) D, S, "+" or "-" Below 1 Ω
      Except D, S, "+" and "-" 10 kΩ or higher

      If the result is not as specified, replace the park/neutral position switch assembly.