ATF TEMPERATURE SENSOR INSTALLATION


  1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY


    1. Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.

    2. Coat the 4 bolts with ATF.

    3. A01HY6RE14
      Text in Illustration
      *a ATF Temperature Sensor Assembly Connector
      *b Clamp

      Install the ATF temperature sensor assembly and clamp to the transmission valve body assembly with the 4 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }
      Bolt length
      Bolt (A)
      25 mm (0.984 in.)
      Bolt (B)
      85 mm (3.35 in.)

    4. Connect the ATF temperature sensor assembly connector.

  2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY (When Using the Engine Support Bridge)

    Click here

  3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY (When Not Using the Engine Support Bridge)

    Click here