DYNAMIC RADAR CRUISE CONTROL SYSTEM OPERATION CHECK


  1. INPUT SIGNAL CHECK

    A01I0G3E01
    Text in Illustration
    *a ON/OFF
    *b -/SET
    *c +/RES
    *d CANCEL
    *e MODE

    1. Connect the Techstream to the DLC3.

    2. Check the cruise control main switch using the Data List function of the Techstream (ON-OFF, -/SET, +/RES, CANCEL and MODE).

  2. INSPECT MODE SWITCH

    A01HXNHE01
    Text in Illustration
    *a ON/OFF
    *b MODE

    1. Turn the engine switch on (IG).

    2. Turn the dynamic radar cruise control system on using the cruise control main switch (ON-OFF button). Then push the cruise control main switch to MODE and hold in that position for 1 second or more to change to constant speed control mode.

    3. A01I17ME01
      Text in Illustration
      *a

      Cruise Control Indicator

      (Vehicle-to-vehicle distance control mode)
      *b

      Cruise Control Indicator

      (Constant speed control mode)

      Check that the cruise control indicator (vehicle-to-vehicle distance control mode) goes off and the cruise control indicator (constant speed control mode) illuminates.

      Note

      Do not push any other switches before pushing the cruise control main switch to MODE. If another switch is pushed, turn the dynamic radar cruise control system off and repeat the procedure.

      Tech Tips

      If a malfunction is detected, turn the engine switch off and repeat the procedure.

  3. INSPECT STEERING PAD SWITCH ASSEMBLY


    1. Turn the engine switch on (IG).

    2. Turn the dynamic radar cruise control system on using the cruise control main switch (ON-OFF button).

    3. Press the vehicle-to-vehicle distance control switch of the steering pad switch assembly.

      A01HYPEE01
      Text in Illustration
      *a Vehicle-to-vehicle Distance Control Switch - -

    4. Check that the indication of the vehicle-to-vehicle distance, which is shown on the combination meter assembly (multi-information display), changes from long to middle to short in that order.

      A01HY27E01
      Text in Illustration
      *a Long *b Middle
      *c Short - -

      Tech Tips

      Long is automatically selected each time the engine is started.