CRUISE CONTROL MAIN SWITCH INSPECTION


  1. INSPECT CRUISE CONTROL MAIN SWITCH


    1. for cruise control system:


      1. Measure the resistance according to the value(s) in the table below.

        A01HYBCE19
        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 3 Main Switch off 1 MΩ or higher
        Main Switch on Below 1.5 Ω
        +/RES 235 to 245 Ω
        -/SET 617 to 643 Ω
        CANCEL 1509 to 1571 Ω
        Text in Illustration
        *1 Cruise Control Main Switch (ON-OFF button) - -
        *a

        Component without harness connected

        (Cruise Control Main Switch)

        		 *b ON-OFF
        *c +/RES *d -/SET
        *e CANCEL - -

    2. for dynamic radar cruise control system:


      1. Measure the resistance according to the value(s) in the table below.

        A01HYXIE27
        Text in Illustration
        *1 Cruise Control Main Switch (ON-OFF button) - -
        *a

        Component without harness connected

        (Cruise Control Main Switch)

        		 *b ON-OFF
        *c +/RES *d -/SET
        *e MODE *f CANCEL
        Standard Resistance
        Tester Connection Condition Specified Condition

        1 - 2

        1 - 3

        		 Main Switch off 1 MΩ or higher
        1 - 3 Main switch on Below 1.5 Ω
        1 - 2 MODE Below 1.5 Ω
        1 - 3 +/RES 235 to 245 Ω
        1 - 3 -/SET 617 to 643 Ω
        1 - 3 CANCEL 1509 to 1571 Ω