STARTER DISASSEMBLY


  1. REMOVE REPAIR SERVICE STARTER KIT


    1. A01I0DG

      Remove the nut and disconnect the lead wire from the magnetic switch.

    2. A01I0L5

      Holding the magnetic switch to the starter drive housing, remove the 2 screws.

    3. Remove the magnetic switch.

    4. Remove the return spring and plunger from the starter drive housing.

  2. REMOVE STARTER YOKE ASSEMBLY


    1. A01I0JD

      Remove the 2 through-bolts, and pull out the starter yoke together with the commutator end frame.

    2. A01I0JZ

      Remove the starter yoke from the commutator end frame.

  3. REMOVE STARTER ARMATURE PLATE


    1. A01I0GH

      Remove the armature plate from the starter yoke.

  4. REMOVE STARTER COMMUTATOR END FRAME COVER


    1. A01HXLA

      Using a screwdriver, pry out the commutator end frame cover.

  5. REMOVE STARTER ARMATURE ASSEMBLY


    1. A01I1UME09
      Text in Illustration
      *1 Snap Ring Pliers

      Using snap ring pliers, remove the snap ring and plate washer.

      Note

      Do not drop the starter armature assembly.

    2. Remove the armature from the commutator end frame.

  6. REMOVE PLANETARY GEAR


    1. A01HXME

      Remove the 3 planetary gears from the starter drive housing.